A Guide to Maintaining Your Solar Panels

Your utility rates are getting higher every year, aren’t they?

Fortunately, sunlight is free and abundant. Forget about load shedding, increased electricity costs, and power blackouts during a windy climatic condition when you have a solar panel installed at your home.

Installing solar panels in a home helps you reduce monthly utility bills and increases the house’s value compared to a house with no solar panels. You can compare electricity prices to keep the track of your reduced energy bills.

In addition to this, a solar power system will either reduce or completely waive your bills.

Solar power systems require low maintenance and stay functional for years; however, a little care can go a long way.

Regular check-ups will save you costly repairs and keep your panels looking nice and shiny. The system is also quite easy to understand and it is not a bad idea to be well versed with every component to maintain it.

So, if you have solar panels installed in your house, here’s how you can keep up with maintenance.

Keep Them Clean

It would be best to clean solar panels when moist or wet to remove any dirt or residue stuck on them. Cleaning the glass on the panel is a simple procedure that depends on how much dirt has accumulated. To clean panels, use a soft cloth, rugs, or biodegradable soaps.

However, it is always a good idea to check once a month to ensure there is no dirt, snow, or leaves. If there is, a light rinse off with a hose should take care of the issue.

Mounting and Racking

Racking ensures that your solar system mounts to the roof. A solar mounting system is a component that secures solar panels to your roof and holds them in place. The bolt penetration holds the weight of the solar panels. Be assured that these systems are well tested for durability and craftsmanship.

These issues are often covered under warranty- avoid fixing them on your own.

Panel Insurance

Weather is unpredictable and an extremely bad storm, tornado, or hurricane can result in a broken panel. Broken glass can ultimately have a poor impact on the panel’s performance.

The problem can be easily diagnosed by simply looking at the cosmetic appearance of the panel. Moreover, you can watch their performance through online monitoring.

Fortunately, certain insurance plans can cover damage to panels in case of severe weather conditions.

Keep Track and Monitor Consumption Performance

Solar monitoring system measures information about your system’s energy production. Most solar systems come with unlimited online monitoring, which helps keep track of the system’s daily, weekly, and monthly performance.

Checking online monitoring once every few weeks is a good idea, and many house proprietors enjoy the system to see the output generated by solar panels. A regular inspection identifies any problem, and you can immediately report to the installer to get it fixed.

Prevent Shading

Shading is one thing you already avoid when doing a proper analysis during the pre-installation of solar panels. Ensure no shading as this will decrease the amount of energy produced by the system; however, do not cut down trees to do so, just trim them.

In Conclusion:

Solar power in the long-run is more cost-effective than “regular” or standard electricity. Installing new solar panels is cheaper than a comparable investment in coal, natural gas, or other fossil fuels.

Harnessing the power of the sun cuts down energy bills and increases the overall value of your home when you sell it; therefore, it’s wise to maintain your panels and ensure they are safe from any kind of debris.

Home Base Project Team
At The Home Base Project, we offer practical, real-life tips and inspiration about DIY, decorating and gardening. The Home Base Project provide the best information about home renovation and design, connecting home design enthusiasts and home professionals across the world.

Related Posts

Comments

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Recent Stories