While having an air conditioner is a blessing, it can become a nightmare if you don’t handle it properly and this can end up draining your finances.
How you use your air conditioner is just as essential as its size or energy rating. Even if you’ve recently replaced your air conditioner with a new one, there are certain things you can do to make it run as effectively as possible.
If your thermostat has a lever that you move behind a temperature scale, consider changing it. Programmable and smart thermostats are among the most recent HVAC innovations.
While this additional equipment is more costly for professional air conditioner installations than its competitors, it’s more efficient and effective.
When you use smart thermostats or AC controllers, you may save up to 25% on your power costs. You can set your thermostat to the temperature you want and let it know when you’ll be home and when you won’t using automation and intelligent triggers.
It will then efficiently maintain your preferred temperature for whenever you’re there.
When turning on the thermostat, don’t set it too low or make frequent changes. The home will take the same time to reach your desired temperature.
Constant changes require more energy and produce temperature fluctuations, which are bad for your health. Set your air conditioner to the hottest setting you can tolerate as the temperature rises.
The US Department of Energy recommends keeping interior temperatures as near to outside temperatures as possible for maximum efficiency and comfort.
Set your air conditioner to a higher temperature, like 75 degrees Fahrenheit, when you’re out, so it doesn’t become too hot and takes hours to cool down.
Never turn on an air conditioner with a filthy filter or condenser coil protection blades. Dirt obstructs the flow of air that your air conditioner requires.
The harder the blower and fan have to work to move cold air out and vent hot air away from the condenser and compressor coils, the less easily air flows around them. Clean delicate aluminum blades with a gentle brush and vacuum or replace filters.
Many people overlook the need to create zones with their HVAC system, even though they save money and are necessary for effective and efficient air conditioning. You may use HVAC zoning to establish a precise temperature for each defined location.
You won’t waste money cooling your entire house while lounging in your living room this way.
Many people only use fans to cool areas when they don’t have an AC. For optimal temperature dispersion, pair your air conditioner with fans. Fans move air more quickly than air conditioners.
Instead of choosing between an air conditioner and a fan, combine the two for the most comfort and efficiency. Another strategy to boost efficiency is to move lights and heat-producing equipment away from the thermostat so that their heat does not interfere with it.
These are some basic air conditioning cost-cutting strategies. You may have an energy-efficient air conditioner simply by being wise and adopting simple lifestyle modifications.
Then you won’t have to worry about your air conditioning bills in the winter or summer. Simply follow the advice mentioned above for a few months, and you’ll notice a difference.
Note to the writer: Overall you’ve done a fantastic job in this article. The info was clear, flowed well, and highly useful for readers.
You appeared to do the proper research and matched both client and stylistic guidelines very well. Besides a few extremely minor areas of rewording.
Everything in this article was clear, straightforward, and well-written. You also did a great job with links and images.